Additional information, Troubleshooting, Care

8 Additional information

Update software

For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website.

Caution

•Power supply must not be interrupted during software upgrade.

1Press SETUP.

2Select [Preferences] > [Version Info], and then press OK.

3Write down the ﬁ le name, and then press SETUP to exit the menu.

4Visit www.philips.com/support to check for the latest software version, using the ﬁ le name for this product.

5Refer to the upgrade instructions on the website for more information.

Note

•Disconnect the power cord for a few seconds and connect again to turn on the product.

Care

Caution

•Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs.

Clean discs

Wipe the disc with a micro ﬁ bre cleaning cloth from the centre to the edge in a straight line movement.

Speciﬁ cations

Note

•Speciﬁ cation and design are subject to change without notice

USB

•Compatibility: Hi-Speed USB (2.0)

•Class support: UMS (USB Mass Storage Class) Video

•Signal system: PAL / NTSC

•Composite video output: 1 Vpp ~ 75 ohm

•Component video output: 0.7 Vpp ~ 75 ohm

•HDMI output: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p

Audio

•Analog stereo output

•Signal to noise ratio (1 kHz): > 90 dB (A-weighted)

•Dynamic Range (1 kHz): > 80 dB (A-weighted)

•Crosstalk (1 kHz): > 90 dB

•Distortion/noise: (1 kHz): > 75 dB

•MPEG MP3: MPEG Audio L3

•Digital output

• Coaxial

•HDMI output

Main unit

•Dimensions (w x h x d): 360 x 39 x 209 (mm)

•Net Weight: approximately 1.48 kg

Power

•Power supply rating: 110 - 240V, 50/60HZ

•Power consumption: < 10 W

•Power consumption in standby mode: < 0.1 W Accessories supplied

•Remote control and batteries

•HDMI cable

•Audio/Video cables

•User Manual

•Quick Start Guide

Laser speciﬁ cation

•Type: Semiconductor laser InGaAIP (DVD), AIGaAs (CD)

•Wave length: 655 nm (DVD), 790 nm (CD)

•Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD)

•Beam divergence: 60 degrees

9 Troubleshooting

Warning

•Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.

If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.

If you contact Philips, you will be asked for the model and serial number of your product.The model number and serial number are on the back of your product.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

English

EN 19