Main unit
The buttons on this unit do not work.
•Disconnect this product from the power
outlet for a few minutes, then connect again. No reaction to the remote control.
•Connect this product to the power outlet.
•Point the remote control at the IR sensor located on the front panel of this product.
•Insert the batteries correctly.
•Insert new batteries in the remote control.
Picture
No picture.
•See the TVs user manual on how to select the correct input on the TV. Change the TV channel until you see the Philips screen.
•If you have turned on the progressive scan setting or change the TV system setting, switch back to default mode: 1) Press 
to open the disc compartment. 2) Press the Numeric button ‘1’ (for progressive scan) or the Numeric button’3’ (for TV system).
No picture on HDMI connection.
•If this product is connected to an unauthorized display device with an HDMI cable, the audio/ video signal may not be output.
•Check if the HDMI cable is faulty. Replace a new HDMI cable.
•If this happens when you change the HDMI video resolution, you have to switch to its default mode: 1) Press 
to open the disc compartment. 2) Press the numeric button “1”.
Sound
No audio output from the TV.
•Ensure that the audio cables are connected to the audio input of the TV.
•Assign the audio input of the TV to the corresponding video input. See the TV user manual for details.
No audio output from the loudspeakers of the audio device (stereo system/amplifi er/receiver).
•Ensure that the audio cables are connected to the audio input of the audio device.
•Turn on the audio device to its correct audio input source.
No sound on HDMI connection.
•You may not hear any sound from the HDMI output if the connected device is
•Ensure that the [HDMI Audio] setting is turned on.
No sound during DivX video playback
•The audio codec may not be supported by this product.
Play
The disc cannot be played.
•The disc is badly scratched, deformed, or dirty. Replace or clean the disc.
•Use the correct disc format or fi le format.
DivX video fi les cannot be played.
•Ensure that the DivX video fi le is complete.
•Ensure that the fi le name extension is correct.
•Due to Digital Rights issue, the DRM- protected video fi les cannot be played through an analog video connection (e.g. composite, component and scart). Use an HDMI connection to play these fi les.
The aspect ratio of the screen is not aligned with the TV display setting.
•The aspect ratio is fi xed on the disc.
DivX subtitles are not displayed correctly.
•Ensure that the subtitle fi le name is the same as the movie fi le name.
•Select the correct character set.
•Press SETUP.
•Select [Preferences] > [DivX Subtitle] in the menu.
•Select the character set that supports the subtitle.
10 Glossary
A
Aspect ratio
Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a
The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.
D
DivX
This DivX Certifi ed ® device must be registered in order to play DivX
20EN