Philips DVP5388K/51 Turn on Progressive Scan, Press B repeatedly to select Video Setup

Page 14

Turn on Progressive Scan

Connect a progressive scan TV with component video sockets (see chapter ‘Connect video cables - Option 2: Connect to component video sockets’ for details).

1 Turn on the TV to the correct viewing channel for this DVD player.

2 Press SETUP.

3 Press B repeatedly to select [ Video Setup Page ].

4 Select [ Progressive ] > [ On ], then press OK.

A warning message is displayed.

Video Setup Page

 

TV Type

 

 

 

 

 

 

TV Display

 

 

 

 

 

 

Progressive

 

 

 

On

 

 

Picture Setting

 

 

 

Off

 

 

HD JPEG

 

 

 

 

 

 

HDMI Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 To proceed, select [ OK ] and press OK. The progressive setup is complete.

Note

If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.

If no picture displayed, turn off the progressive scan mode as follows:

1)Press Z to open the disc compartment.

2)Press the numeric button ‘1’.

6 To exit the menu, press SETUP.

7 You can now turn on the progressive scan mode on the TV (see the TV user manual).

Note

The progressive scan setting will not be available when the HDMI video signal is detected.

During play, when progressive scan mode is on for both this DVD player and the TV, distorted picture may display. Turn off the progressive scan feature on both this DVD player and the TV.

Get started English

EN 15

Image 14
Contents Register your product and get support at Contents Recycle notice Safety and important noticeAbout Progressive Scan Plays DivX video with menus, subtitles and audio tracks Trademark NoticeCopyright notice Region codes Features highlightYour DVD player Main unit Remote controlProduct overview V b B Navigation buttons Navigate through the menus Option 1 Connect to Hdmi socket ConnectConnect video cables Option Connect to video Cvbs socket For a standard TVConnect audio cables Connect to digital amplifier/receiver Route audio to other devicesConnect to multi channel receiver Connect to analogue stereo systemConnect to power outlet Connect USB deviceNavigate through the menu Prepare the remote controlGet started Move left or rightFind the correct viewing channel Select menu display languageTurn on Progressive Scan Press B repeatedly to select Video SetupTo exit the menu, press Setup Select Progressive On , then press OKUse Philips EasyLink 16 ENPlay a disc PlayPlay from disc Change video play Play videoControl a title Preview disc contents Access DVD menuAccess VCD menu View DVD play from different angles Quick skip play to a specific timeDisplay play time Repeat play videoTime or title remaining Set repeat play for a specific sectionStop disc play Play timeQuick skip play Play musicControl a track Repeat play audioPlay photos as slideshow Play photoPlay MP3/WMA music This DVD player can play Jpeg photos filesControl photo play Play musical slideshowPlay from USB device Select Yes in the menu to start to copy, then press OK Media copyCreate MP3 files Insert an audio CDAdvanced features English Turn off vocal cancel voice Adjust soundKaraoke settings 28 ENSelect an option, then press OK Adjust settingsGeneral setup SleepAudio setup 30 ENAudio. Audio is Lpcm Output settingSignal below 120 Hz Downmixed to twoCenter Speaker / Rear Speaker Option Description Large Video setup 720p HD Jpeg480p , 576p 1080pSystem Auto WakeUp TV StandbyOff skip the menu and start play from the first track ParentalPBC Mp3/Jpeg NavDefault Care Update softwareAdditional information Specification USBLaser Specification PowerMain unit 40 ENSound TroubleshootingPicture Play DVI GlossaryHdmi JpegWMV PBCWMA Бытовая Электроника Интернет Language Code