Use Philips EasyLink
The DVD player supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink- compliant devices that are connected through HDMI connectors can be controlled by a single remote control.
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
1 Turn on the HDMI CEC operations on the TV and other connected devices. See TVs/ devices manual for details.
2 You can now enjoy the following Philips EasyLink controls.
Auto Wake Up TV (One-touch play)
When you press the STANDBY button, it turns on the TV and this DVD player, then video disc play starts.
•To enable
System Standby (One-touch standby)
When you press and hold the STANDBY button, all connected HDMI CEC devices switch to standby mode simultaneously.
Tip
•The default setting for EasyLink features is on. You can change the default setting, see chapter ‘Adjust settings’ - [ Video Setup Page ] > [ HDMI Setup ] > [ EasyLink ] for details.