&RQQHFWWRGLJLWDODPSOLÀHUUHFHLYHU
DIGITA L IN
1Connect a coaxial cable (not supplied) to: the COAXIAL jack on this product. the COAXIAL/DIGITAL input jack on
the device.
Connect analogue stereo system
AUDIO IN
1Connect the supplied AV cables to:
the AV OUT jack (3.5mm) on this product.
the audio input jacks on the device.
&RQQHFW86%ÁDVKGULYH
1 &RQQHFWD86%ÁDVKGULYHWRWKH
jack on
this product.
Note
This product can only play/view MP3, WMA, DivX or
Press the 
button to access the content and play
WKHÀOHV
Connect power
Caution
Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
Before connecting the AC power cord, ensure you have completed all other connections.
Note
The type plate is located on the bottom of the product.
1 Connect the AC power cable: to this product.
to the wall outlet.
4 Get started
Prepare the remote control
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity
3Close the battery compartment.
Caution
Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
Do not mix batteries (old and new or carbon and alkaline, etc.).
Batteries contain chemical substances, so they should be disposed of properly.
Find the correct viewing channel
1Press 
to turn on this product.
2Turn on the TV and switch to the correct
24EN