Option 1: Connect to the HDMI jack
HDMI IN
1Connect an HDMI cable (not supplied) to the HDMI OUT jack on this product. the HDMI input jack on the TV.
Note
If the device supports HDMI CEC, you can control compliant devices with a single remote control (see “Get started” > “Use Philips EasyLink”).
Tip
This type of connection provides best picture quality.
Option 2: Connect to the component video jack
rP bP Y
COMPONENT
VIDEOIN
1Connect the component video cables (not supplied) to:
the Y Pb Pr jacks on this product.
the COMPONENT VIDEO input jacks on the TV.
Tip
The component video input jack on the TV might be labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture quality.
Option 3: Connect to the AV OUT jack
1Connect the supplied AV cables to:
the AV OUT jack (3.5mm) on this product.
the video input jack on the TV.
IDEOV IN | English |
|
Tip
The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard picture quality.
Connect audio cables
Connect the audio from this product to the TV to allow sound output through the TV.
AUDIO IN
1Connect the supplied AV cables to:
the AV OUT jack (3.5mm) on this product.
the audio input jacks on the TV.
Route audio to other devices
Route the audio from this product to other devices to enhance audio play.
EN 23