Philips DVP3980K/55 manual Getting Started, Finding the correct viewing channel

Getting Started

Finding the correct viewing channel

A Press STANDBY-ONto turn on this unit.

B Turn on the TV and switch it to the correct video-in channel. You should see the blue DVD background screen.

You may go to the lowest channel on your TV, then press the Channel Down button on your TVs remote control until you see the Video In channel.

You may press ° button repeatedly on your TVs remote control.

Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO, etc..

Refer to your TVs user manual on how to select the correct input on your TV.

C If you are using external device, (such as audio system or receiver), turn it on and select the appropriate input source for this unit output. Refer to the device user manual for detail.

Setting language preferences

The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual.

On-screen display (OSD) language

Select this to change the language of the On screen display menu of this unit. The menu language will remain once you have set it.

A Press SETUP on the remote control.

B Use  keys to select { OSD Language } in the menu and press .

General Setup Page

Disc Lock
OSD Language	Auto (ENG)
Sleep	ENGLISH
Lip Sync	ESPAÑOL
Volume	PORTUGUÊS
Auto Standby
DivX(R) VOD Code

C Use  keys to select a language and press OK to confirm.

Note:

–To synchronize with a Philips ‘EasyLink’ TV, the OSD language must be set to { Auto (xxx) }. This is the language available from the Philips ‘EasyLink’ TV.

–If a non-supported language is selected, the default OSD language of this unit will be used.

English

17

dvp3980K_55_eng1.indd 17 2008-03-26 10:23:17 AM