Adjust settings, Audio setup, General setup

•To select all tracks, select [Select all] in the menu, and press OK.

•To deselect all tracks, select [Deselect all] in the menu, and press OK.

8Select [Start] in the menu, and then press OK to start to convert.

»Once complete, a new folder is created automatically in the USB ﬂash drive to store all the new MP3 ﬁles.

•To exit the menu, select [Exit], and then press OK.

Note

•When you convert, never press any button.

•DTS CDs and copy-protected CDs cannot be converted.

•Writer-protected or password-protected USB ﬂash drives cannot be used to store MP3 ﬁles.

7 Adjust settings

Note

•If the setup option is grayed out, it means the setting cannot be changed at the current state.

•[Lock] - Restrict the access to the current disc. At the next time when you want to play this disc or unlock it, you need to enter the password.

•[Unlock] - Play all discs.

[OSD Language]

Select a language for on-screen menu. [Sleep Timer]

Switch automatically to standby at the preset time.

•[Off] - Disable sleep mode.

•[15 Mins], [30 Mins], [45 Mins], [60 Mins] - Select the countdown time for this product to switch to standby.

[Auto Standby]

Turn on/off the auto standby mode.

•[On] - Switch to standby after 15 minutes of inactivity (for example, in pause or stop mode).

•[Off] - Disable the auto standby mode.

English

1Press SETUP.

» [General Setup] menu is displayed.

2Pressto enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press SETUP.

[Disc Lock]

Set the play restriction for a disc which is loaded in the disc compartment (maximum 20 discs can be locked).

1Press SETUP.

» [General Setup] menu is displayed.

2Pressto select [Audio Setup], and then pressto enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, pressBACK .

•To exit the menu, press SETUP. [Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

• [LT/RT] - For the surround sound output through two speakers.

• [Stereo] - For the stereo output.

• [Multi Channel] - For multi-channel output. [Volume]

Set the default volume level when you play a disc.

EN 13