Video setup

1. Press OK.

2. Press to set the volume.

3. Press OK to conﬁrm and exit.

[Sound Mode]

Select a preset sound effect to enhance the audio output.

•[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.

•[Movie Mode] - Select a sound effect for movies.

•[Music Mode] - Select a sound effect for music.

[Speaker Setup]

Optimize the surround output for the connected speakers.

[CD Upsampling]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

•[Off] - Turn off CD-upsampling.

•[88.2kHz] - Convert to twice the original sampling rate.

•[176.4kHz] - Convert to four times the original sampling rate.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

•[On] - Enjoy quiet viewing at night.

•[Off] - Enjoy surround sound with a full dynamic range.

Note

•Applicable only to Dolby Digital encoded DVDs.

1Press SETUP.

» [General Setup] menu is displayed.

2Press to select [Video Setup], and then press to enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press SETUP.

[TV System]

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

•[PAL] - For a PAL-system TV.

•[Multi] - For TV that is compatible with both PAL and NTSC.

•[NTSC] - For an NTSC-system TV.

[TV Display]

Select a display format:

•[4:3 Pan Scan] - For a 4:3 screen TV: full-height display with the trimmed sides.

•[4:3 Letter Box] - For a 4:3 screen TV: wide- screen display with black bars on the top and bottom of the screen.

•[16:9] - For a wide-screen TV: display ratio

16:9.

[Progressive]

If a progressive scan TV is connected to this product, turn on the progressive scan mode.

•[On] - Turn on progressive scan.

•[Off] - Turn off progressive scan mode.

Note

•For more detailed description, see “Get started” > “Turn on progressive scan”.

[Picture Setting]

Select a predeﬁned set of picture color settings or customize the personal setting.

•[Standard] - Original color setting.

•[Bright] - Vibrant color setting.

•[Soft] - Warm color setting.

•[Personal] - Customize the color setting. Set the level of brightness, contrast, tint and color

saturation, then press OK. [My Wallpaper]

Select a picture as the wallpaper.

•[Default picture] - The default wallpaper preset as the Philips logo.

14EN