1.Press the Numeric buttons to enter ‘136900’ or the last set password at [Old Password] field.
2.Enter the new password at [New Password] field.
3.Enter the new password again at [Confirm PWD] field.
4.Press OK to exit the menu.
Note
•If you forget the password, enter ‘136900’ before you set a new password.
[Version Info]
Display the software version of this product.
Note
•This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this product.
[Default]
Reset all the settings of this product to factory default, except for [Disc Lock], [Parental Control] and [Password] settings.
8 Additional information
Update software
For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website.
Caution
•Power supply must not be interrupted during software upgrade.
1Press SETUP.
2Select [Preferences] > [Version Info], and then press OK.
3Write down the file name, and then press SETUP to exit the menu.
4Visit www.philips.com/support to check for the latest software version, using the file name for this product.
5Refer to the upgrade instructions on the website for more information.
Note
•Disconnect the power cord for a few seconds and connect again to turn on the product.
Care
Caution
•Never use solvents such as benzene, thinner, cleaners available commercially, or
Clean discs
Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement.
Specifications
Note
•Specification and design are subject to change without notice
USB
•Compatibility:
•Class support: UMS (USB Mass Storage Class)
16EN