Philips DVP3156/93 user manual Using the Audio setup menu, Analog Output, Digital Audio Setup

DVD Menu Options (continued)

Using the Audio setup menu

APress SETUP on the remote control. The system setup menu appears.

Audio Setup Page

Analog Output

Digital Audio Setup

Sound Mode

Speaker Setup

CD Upsampling

Night Mode

BPress W X to select { Audio Setup Page }.

CPress S T to select an item, then press X to access.

Example: { Night Mode }

The options for the selected item appears.

If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.

DUse S T to select a setting and press OK to confirm.

Example: { On }

The setting is selected and setup is complete.

ETo exit, press SETUP.

Analog Output

This option allows you to set the stereo analog output of your DVD player.

AIn ‘Audio Setup Page’, press S T to select { Analog Output }, then press X.

{Stereo }

Select this option when output delivers sound from only the two front speakers.

{LT/RT }

Select this option if your DVD player is connected to a Dolby Pro Logic decoder.

{V SURR }

Allows the DVD player to use virtual surround sound effects.

{Multi-channel }

Select this to enable Multi-channel output.

BUse S T to select a setting and press OK to confirm.

Digital Audio Setup

The options included in Digital Audio Setup are: {Digital Output} and {LPCM Output}.

AIn ‘Audio Setup Page’, press S T to

select { Digital Audio Setup }, then press X.

BPress S T to select an item, then press X to access.

CUse S T to select a setting and press OK to confirm.

English

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

35

01-49_dvp3156_93_eng2.indd 35 2007-03-30 3:01:23 PM