Philips DVP3156/93 user manual Sound and Volume Controls, Setting the speaker’s channels

Sound and Volume Controls

Setting the speaker’s channels

You can adjust the delay times (center and rear only) and volume level for individual speakers. These adjustments let you optimises the sound according to your surroundings and setup.

IMPORTANT!

The speaker settings only available on Multi-channel audio outputs.

APress SETUP.

BPress X repeatedly to select { Audio Setup Page }.

CPress S T to highlight { Speaker Setup }, then press X.

Audio Setup Page

Analog Output

Digital Audio Setup

Sound Mode

Speaker Setup

CD Upsampling

Night Mode

Speaker Setup Page

Front Speakers	Large
Center Speaker	Small
Rear Speakers
Subwoofer
Speakers Volume
Speakers Delay

DEnter its submenu by pressing X.

EPress S T to highlight one of the options below at a time, then press X.

{Front Speakers, Center Speaker, Rear Speakers}

Off – when no speaker is connected. Large – when connected speakers can produce low frequency signals below 120Hz.

Small – when connected speakers cannot produce low frequency signals below 120Hz.

{Subwoofer}

On – when a subwoofer is connected. Off –when no subwoofer is connected.

{Speakers Volume}

Volume Level setting for individual speakers (-6dB ~ +6dB).

Speaker Setup Page

Front Left	+6dB
Front Right	+6dB
Center	+6dB
Subwoofer	0dB
Rear Right	+6dB
Rear Left	+6dB

{Speakers Delay}

Delay times setting in relation to the listening position or distance for center and rear speakers (1m ~ 10m).

Speaker Setup Page

Center	1.0M
Subwoofer	1.0M
Rear Left	1.0M
Rear Right	1.0M

FPress W X to adjust the setting that best suit your surround sound needs.

GPress OK to confirm.

Tip:

– Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

English

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

43

01-49_dvp3156_93_eng2.indd 43 2007-03-30 3:01:28 PM