Philips DVP3156/93 CD Upsampling Night Mode turning on/off, Select this to disable CD Upsampling

DVD Menu Options (continued)

CD Upsampling Night Mode - turning on/off

This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.

AIn ‘Audio Setup Page’, press S T to

select { CD Upsampling }, then press

X.

{Off }

Select this to disable CD Upsampling.

{88.2 kHz (x2) }

Select this to convert the sampling rate of the CDs twice higher than the original.

{176.4 kHz (x4) }

Select this to convert the sampling rate of the CDs four times higher than the original.

BUse S T to select a setting and press OK to confirm.

Tip:

– CD Upsampling feature is only applicable to stereo output setting when playing CD disc.

This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.

AIn ‘Audio Setup Page’, press S T to select { Night Mode }, then press X.

{On }

Select this to set low volume output. This feature is only available for movie discs with Dolby Digital mode.

{Off }

Turns off night mode feature. Select this to enjoy the surround sound with its full dynamic range.

BUse S T to select a setting and press OK to confirm.

English

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

37

01-49_dvp3156_93_eng2.indd 37 2007-03-30 3:01:23 PM