DVD Setup Menu Options
E n g l i s h
Progressive - turning on/off
In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player’s Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see page 15.
1In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {PROGRESSIVE}, then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2Press 3 4 to select a setting, then press OK to confirm your selection.
➜Follow the instructions shown on the TV to confirm the selection (if any).
➜If a distorted picture appears on the TV screen, wait for 15 seconds for auto recovery.
Sharpness
You can personalize your picture colour by adjusting sharpness.
1In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {SHARPNESS}, then press 2.
HIGH
Choose high to make the picture’s edge sharper.
MEDIUM
Choose medium to get a standard picture.
LOW
Choose low to make the picture’s edge softer.
2Press 3 4 to select a setting, then press OK to confirm your selection.
Brightness / Contrast / Color
Increasing the value will brighten the picture or vice versa. Choose zero (0) for average setting.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {BRIGHTNESS}, {CONTRAST} or {COLOR}, then press 2.
➜ The menu appears.
Brightness 0
Contrast 0
Color 0
2 Press 1 2 to adjust the setting that best suit your personal preference.
3 Press OK to confirm.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
28
28 | 27/06/06, 1:28 PM |