Philips DVP3002/93 user manual Setting language preference, Setting the OSD Language

E n g l i s h

Step 3: Setting language preference

The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual.

Setting the OSD Language

The On-screen language for the system menu will remain as you set it, regardless of various disc languages.

General Audio Video Preference

- - General Setup Page - -

1Press SYSTEM MENU.

2Press 2 to select {GENERAL SETUP PAGE}.

3Press 3 4 to highlight {OSD LANGUAGE}, then press 2.

4Press 3 4 to select a language and press OK.

Setting the Audio, Subtitle and Disc menu language

You can choose your own preferred language or soundtrack from audio, subtitles and disc menu languages. If the language selected is not available on the disc, the disc’s default language will be used instead.

1Press STOP twice then, press SYSTEM MENU.

2Press 2 repeatedly to select

{PREFERENCE PAGE}.

3Press 3 4 to highlight one of the options below at a time, then press 2.

–‘Audio’ (disc’s soundtrack)

–‘Subtitle’ (disc’s subtitles)

–‘Disc Menu’ (disc’s menu)

4Press 3 4 to select a language and press OK.

If the language you want is not in the list, then select {OTHERS},

then use the numeric keypad (0-9) on the remote to enter the 4-digit language code ‘XXXX’ (see page 60 “Language Code”) and press OK.

5Repeat steps 3~4 for other language settings.