Philips DVP3002/93 Receiver has a PCM, Dolby Digital, or MPEG2 decoder, Helpful Hint

	Connections
Optional: Connecting to an	Optional: Connecting Digital AV	h
Audio System	Receiver	lis
		Eng
STEREO
	AV Receiver
AUDIO	AUDIO
IN	IN
DIGITAL	DIGITAL

Stereo system has Dolby Pro Logic or Right / Left Audio In jack

1Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).

Receiver has a PCM, Dolby Digital, or MPEG2 decoder

1Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the COAXIAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied).

3Set the DVD Player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (see page 23 “Digital Output”).

Helpful Hint:

–If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

9

DVP3005&3000/69_1

01-31 DVP3002_Eng_93914/02/06, 3:46 PM