![](/images/new-backgrounds/1128467/128467113x1.webp)
Automatic recording from a satellite receiver (Sat recording)
You can use this function if you own a satellite receiver that can control other devices via a scart cable and a programming function (timer). For more information, please see the operating instructions for the satellite receiver.
1Switch on the TV set. If required, select the programme number for the DVD recorder.
2Press
3Select 'A' symbol with D or C .
4Select 'Record settings' using CH- B or CH+ A and confirm with
C .
5Select 'Sat record' using CH- B or CH+ A .
6Select 'EXT2' with D or C .
Switching off 'Sat Recording' | Tip |
To switch off the function, select 'Off' using C or D . |
7Confirm with OK .
8Use a scart cable to connect scart socket EXT 2
9To end, press
0Insert a disc you want to use for recording.
AProgramme the satellite receiver with the required information (programme number of the TV channel, start time, end time).
If necessary, please see the operating instructions for your satellite receiver.
BSwitch off the DVD recorder using STANDBY m . 'SAT' also appears in the display to indicate that the function is active.
The DVD recorder is now ready to record. The start and end of the recording is controlled via scart cable EXT 2
ENGLISH
Manual recording | 51 |
|