Connecting with a scart cable without 'Easy Link'
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), a scart cable (3).
1Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder.
2Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.
3Plug a scart cable into the scart socket EXT 1 TO
My TV set has several scart sockets. Which one should I use? |
|
Select the scart socket that is suitable for both video output and for video |
|
input. |
|
My TV set shows me a selection menu for the scart socket | ? |
Select 'VCR' as tje source for this scart socket. |
4Switch on the TV set.
5Insert one end of the supplied mains cable into the mains socket 4MAINS at the back of the DVD recorder and the other end into
the wall socket.
The most important features of the DVD recorder will appear in scrolling text on the display. After the first installation is completed this function will be switched off. How you switch on this function again, read in the chapter 'User preferences' in the section 'standby'.
6Switch on the DVD recorder using STANDBY/ON m . ' ' will appear on the display.
7If the connection was properly made and your TV was automatically switched to the programme number for the scart socket, e.g. 'EXT', '0', 'AV', you will see the following picture:
14 | Connecting the DVD recorder |
|