Philips DVDR 70/021, DVDR 70/001 manual Problem solving for programmed recordings

ENGLISH

not responding

If you want to cancel the programmed recording, press STANDBY m .

PROBLEM

SOLUTION

The DVD recorder is

bWhile a programmed recording is being made, you cannot operate your DVD recorder manually.

'Switch off, timer

bThe DVD recorder was switched on several minutes before the start of a programmed recording.

recording' flashes on

Switch off the DVD recorder using STANDBY m . A programmed recording (timer) will only

the TV screen.

function if the DVD recorder is switched off ( STANDBY m button).

Error message: 'Insert

bEither a disc has not been inserted or the disc cannot be used for recording. Insert a disc on

recordable disc'

which recordings can be made. Switch off the DVD recorder using

STANDBY m .

The error message

bA write-protected disc has been inserted. Undo the write protection (see 'Preventing accidental

'Disc locked' appears

erasing of discs' in 'Manual recording') or insert a different disc.

briefly on the screen.

Error message:

bIf this error message appears after pressing TIMER , then

all TIMER

blocks are already

programmed. No more recordings can be programmed. Press the

C button. If you want to clear

'Memory full'

or check a programmed recording (TIMER block), select it with CH+ A or

CH- B .

The 'Data error'

bThe data for the recording could not be transferred. Please check date, start time and end time

message appears on

of the programmed recording.

the screen.

The 'Collision'

bTwo programmed recordings overlap.

bIf you ignore this error message the show with the earlier start time will be recorded first. The

message appears on

start of the second show will not be recorded.

the screen.

bChange the setting for either of the two recordings.

bClear either of the two recordings

Programming a recording (TIMER)

67