Philips DVD728/001 owner manual Maintenance, Troubleshooting, Problem Solution

Page 28

E n g l i s h

Maintenance

Cleaning the Cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.

Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center.

Problem

Solution

 

 

No power

– Check if the AC power cord is properly connected.

No picture

– Check if the TV is switched on.

 

– Check the video connection.

 

 

Distorted picture

– The disc is badly scratched or dirty.

 

– Sometimes a small amount of picture distortion

 

may appear .This is not a malfunction.

Completely distorted picture or black/white picture with DVD or Video CD

Make sure the NTSC/PAL setting at the DVD Player matches the video signal of your television. (See NTSC/PAL CONVERSION)

If the picture becomes distorted after switching between PAL and NTSC, please set the SMART PICTURE to STANDARD.

No sound or distorted sound

Adjust the volume.

 

 

Check that the speakers are connected correctly.

28

 

 

 

01-29 DVD728 Eng

28

 

3139 246 12381

 

18/03/2003, 4:39 PM

Image 28
Contents DVD Video Player 3139 246Important Note Index EnglishDeutsch Nederlands FrançaisNever Make or Change Connections with the Power Switched on Laser safetyGeneral Information Contents Supplied accessories Safety InformationSymbols Used in this Manual IntroductionFunctional Overview Front and Rear PanelsRemote Control Basic Connections Connecting to a TV Connecting to an Audio System Connecting to Optional EquipmentPreparation If your receiver has a Mpeg 2 or Dolby Digital decoderInserting batteries into the Remote Control Switching OnSmart Power On/Off Using the Remote ControlOperation Basic PlaybackGeneral Operation Video Control during playbackOSD On-Screen Display RepeatRepeat A-B DVD VCD CD Disc ResumeSpecial DVD Features Special VCD & Svcd FeaturesPreview Function Track DigestDisc Interval Track IntervalPicture CD & MP3 CD Playback Play ModeMP3 & Jpeg Navigator Special MP3 Features Special Jpeg FeaturesJpeg and MP3 simultaneous playback Setup Menu General Setup menuBasic Operations OSD languageDisplay Dim Disc LockScreen Saver Stop the program playbackAnalogue Audio Setup menu Downmix modeSound Mode C. Dynamic Range CompressionDigital Audio Setup menu Reverb ModeDigital Output Lpcm OutputTV Type Video Setup menuTV Display Press OK to open its submenu Smart Picture Color SettingBrightness Preference Setup menu Audio languageContrast HuePassword Subtitle languageDisc Menu language If you choose Others in AUDIO, Subtitle or Disc Menu menuDefault Setup Parental Control DVDMP3/JPEG Navigator With MenuSpecifications Troubleshooting MaintenanceProblem Solution Remote control Operating commands during playbackNo audio at digital output No sound and picturePhilips Kundtjänst Service Consumer ServicesPhilips Service Philips Norge AS Philips Portuguesa