Philips DVD728/001 owner manual Basic Connections Connecting to a TV

			Preparation
	Basic Connections	Connecting to a TV
● Please refer to the instruction manuals of your		1 Connect the SCART (TV OUT) on the DVD
	TV,VCR, Stereo System or other devices as		Player to the corresponding connector (TV IN)
	necessary to make the best connections.
			on your TV.

●Make one of the following connections,

depending on the capabilities of your existing	Note:
	– Ensure that the “TV” indication on SCART
equipment.
	cable is connected to the TV set and “DVD”
The following guidelines are options for the best
	indication on SCART cable is connected to the
picture and sound quality available on your DVD
	DVD player.
Player.
Picture	If your TV is not equipped with a SCART input,
	you can select the following connection:

1Use the CVBS Video Ouput for good picture

quality.	If your TV has a CVBS Video input
2 Use SCART Output for best picture quality.	connector,
Sound	1 Connect the CVBS VIDEO OUT on the DVD
	Player to the CVBS VIDEO IN.
1 Digital audio connections provide the clearest
	2 Connect the Left and Right AUDIO OUT on the
sound. Connect the DVD Player’s DIGITAL	DVD Player to the Left and Right AUDIO IN on
AUDIO OUT (COAXIAL or OPTICAL) to your	the TV.
amplifier or receiver.

2	If digital connections are not possible, connect
	the DVD Player’s Left and Right (white and red)			Back
	AUDIO OUT to your amplifier, receiver, stereo
				of TV
	or TV.
Warning!			RIGHT
			AUDIO IN
–	Never make or change connections with		LEFT
			AUDIO IN
				CVBS VIDEO IN	TV IN SCART
	the power switched on.
–	Connect the DVD Player directly to your
	TV, instead of eg. a VCR, to avoid				OR
	distortion because DVD video discs are	TO TV		TO TV		TO TV
	copy protected.	AUDIO IN
				VIDEO IN		SCART IN
–	Do not connect the DVD Player AUDIO
	OUT to PHONO IN of your amplifier or	TV OUT	L	VIDEO	OPTICAL
	receiver.		R	COAXIAL

E n g l i s h

9

01-29 DVD728 Eng	9	3139 246 12381
		18/03/2003, 4:38 PM