Philips DVD700/P02, DVD700AT owner manual Use a cable which is 9.8 feet or shorter

Page 12
Minimum 6 in. in diameter

12 Hookups (cont’d)

Connecting to a TV and an Amplifier with Coaxial Digital Audio In jacks,

a Mini-Disc Deck or a Digital Audio Tape Deck

●Use a coaxial digital audio cable or an audio optical cable (not supplied) for this connection.

●If you use the OPTICAL jack, remove the protective cap.

●If the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound using a Mini-Disc or Digital Audio Tape Deck.

●Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39.If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.

DVD Player

2

VIDEO IN

DIGITAL AUDIO OUT

PCM / BITSTREAM

Back of TV

AUDIO OUT

1

(example only)

OPTICAL COAXIAL

OUT

OUT

 

S-VIDEO

VIDEO R L

1

COAXIAL DIGITAL

Back of Amplifier

 

 

(example only)

 

AUDIO IN

Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player and to the COAXIAL DIGITAL AUDIO IN jack on the Amplifier. (Or, you may connect an audio optical cable to the OPTICAL jack on the DVD Player and to the OPTICAL DIGITAL AUDIO IN jack on the Amplifier.)

2

Connect the supplied yellow video cable to the yellow VIDEO OUT jack on the DVD Player and to the VIDEO IN jack on the TV. (Or, you may connect an optional S-Video cable to the S-VIDEO OUT jack on the DVD Player and to the S-VIDEO IN jack on the TV.)

3

Plug in the Amplifier’s power cord. Turn on the Amplifier and select the Auxiliary IN station. During Disc playback, you will adjust the volume at the Amplifier. See your Amplifier owner’s manual for details.

4

Plug in the TV’s power cord. Turn on the TV and set it to the correct Video In channel. During Audio CD playback, you may check the status of the Disc on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s manual for details.

5

Plug in the DVD Player’s power cord. Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the DVD Player’s display panel. You should see the DVD logo on the TV briefly. If you do not, check your connections and make sure the TV is on the correct channel. If there is no disc in the DVD player, “no DISC” will appear on the display panel.

Helpful Hints

• Optical cable (not supplied) may be damaged when bent at acute angles. Ensure cables are coiled

in loops with a diameter of 6 inches or more when storing them.

•Use a cable which is 9.8 feet or shorter.

•Insert cable plugs firmly into the jacks when making connections.

•If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a jack.

•Replace the protective cap on the OPTICAL jack when it is not in use.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DVD700AT Dear Philips product owner For Customer UseSafety Information Table of Contents Introduction Playable Discs Playable DiscsRegion Codes Color SystemsRemote Control Setup Putting Batteries in the Remote ControlUsing the Remote Control Recycling Guidelines/Battery SafetyHookups DVD PlayerHookups cont’d DVD PlayerConnecting to a TV and a Stereo Connecting to a Dolby Digital Decoder or DTS Decoder Use a cable which is 9.8 feet or shorter DVD Player Display Display MessagesDisplay Disc loading trayStandby Indicator Power ButtonFront Panel Search ButtonsAC Power Cord Audio OUT Jacks Rear PanelOptical Jack Video OUT Jack Coaxial JackRemote Control Buttons Title ButtonDisc, if available. Details are on Return Button Stop ButtonPlay Button Subtitle ButtonPlaying a Disc Playing a DVD or an Audio CDBefore you begin Press the OPEN/CLOSE button to open the Disc trayUsing the DVD Menus Using the Title MenuPausing Playback Pausing PlaybackPress the Play button to resume playback Memory On is not available with Audio CDsStep by Step Playback Fast Forward/Reverse Search Press the Play button to return to normal playbackPress the PAUSE/STILL button during playback You can not play the DVD in reverse slow motionTrack Playback Starting Playback at a Specific TrackWhen playback is stopped, press the Number buttons to Title/Chapter PlaybackStarting Playback at a Specific Title/Chapter Press the Search Mode button repeatedly three times Specific Time PlaybackStarting Playback at a Specific Disc Time Are onRepeat Playback Repeat playback is not available With some discsB Repeat Playback Repeat playback is not available with some DVDsPoint B must be later on the Disc than Point a Programmed Playback Random Playback While the Random screen appears, press the Play butAudio CD Sound Mode DVD LanguageSubtitle Language Subtitle menu will disappear after about 15 secondsCamera Angles Press the Angle button during playbackParental Lock Password While playback is stopped, press the Setup button.Press the Number buttons to enter the 4-digit password Write down the password in case you forget itPress the Number buttons to enter your 4-digit password Lock settings you have madeEnter the correct password Press the Number 1 button to select LevelAccessing the Status Display Status DisplayPress the Number 2 button to select Video Auto is normally selectedAudio Settings To change the Digital OUT settings, go to stepPress the Number 3 button to select Audio Press the corresponding Number button to select anAudio Settings cont’d Language Settings Press the Number 1 button to select LanguageTles will not be shown Disc menusLanguage Settings cont’d Press a Number button to select a settingLanguage Settings cont’d Language Country CodeOther Menu Settings Press the Number 5 button to select OthersHelpful Hints Helpful Hints cont’d Care and Maintenance Cleaning the DVD PlayerCleaning a Disc Checking the LaserGlossary Specifications Limited Warranty DVD PlayerIndex 16-17Page Supplied Accessories
Top Page Image Contents