Philips DVD700/P02, DVD700AT Playing a Disc, Playing a DVD or an Audio CD, Before you begin

Page 18

18 Playing a Disc

DVD AUDIO CD

Playing a DVD or an Audio CD

Before you begin...

Turn on the power of the TV, amplifier and any other equipment connected to the DVD Player. Make sure the TV and the stereo or amplifier (if applicable) are set to the correct channel. Details are on pages 8-12.

1

Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the display panel.

3Insert a Disc.

1	TITLEPOWER		OPEN/	2
1	TITLEPOWER	MENU	CLOSERETURN	2
	ENTER		STOP	5

2

Press the OPEN/CLOSE button to open the Disc tray.

3

Place a Disc into the tray. Make sure the Disc is sitting prop- erly in the correct recess.

REV

4

1

4

7

CLEAR

SETUP

PLAY

FWD

2 3

5 6

8 9

0+10

MODE DISPLAY

Some DVDs are recorded on both sides. Make sure the side you want to play is facing up. Or, if the DVD is recorded on only one side, place the Disc in the tray with the label facing up.

4

Press the PLAY button. The tray will close automatically, and playback will begin at the first Chapter or Track of the Disc. Or, you may press the OPEN/CLOSE button to close the tray, and DVD playback will start automatically. (You also may close the tray by gently pressing the Disc tray toward the DVD Player.)

If the DVD in the tray has a menu, the menu may appear on the screen instead. Details are on page 19.

With some Audio CDs, playback will not begin unless you press the PLAY button.

5

Press the STOP button to stop playback.

Remember, this DVD Player will play only certain Discs.

See page six for details.

	PAUSE/STILL	REPEAT
SKIP	SEARCH MODE	A-B
AUDIO	SUB TITLE	ANGLE

Helpful Hints

•A “No Feature” symbol may appear at the bottom right of the TV screen. This symbol means either the feature you tried is not available on the Disc, or the DVD Player can not access the feature at this time. This does not indicate a problem with the DVD Player.

•If a Disc is dirty or has scratches, the pictures may appear distorted and playback may stop. In such cases, remove the Disc and turn off the DVD Player. Disconnect the power cord, then reconnect it. Clean the Disc, then turn on the DVD Player again and reinsert the Disc for play- back.

•When the DVD or CD light appears on the display panel, the Disc is loaded completely and is ready for playback.

Image 18

Contents DVD700AT Dear Philips product owner For Customer UseSafety Information Table of Contents Introduction Region Codes Playable DiscsPlayable Discs Color SystemsUsing the Remote Control Remote Control SetupPutting Batteries in the Remote Control Recycling Guidelines/Battery SafetyHookups DVD PlayerHookups cont’d DVD PlayerConnecting to a TV and a Stereo Connecting to a Dolby Digital Decoder or DTS Decoder Use a cable which is 9.8 feet or shorter Display DVD Player DisplayDisplay Messages Disc loading trayFront Panel Standby IndicatorPower Button Search ButtonsOptical Jack Video OUT Jack AC Power Cord Audio OUT JacksRear Panel Coaxial JackRemote Control Buttons Title ButtonDisc, if available. Details are on Play Button Return ButtonStop Button Subtitle ButtonBefore you begin Playing a DiscPlaying a DVD or an Audio CD Press the OPEN/CLOSE button to open the Disc trayUsing the DVD Menus Using the Title MenuPress the Play button to resume playback Pausing PlaybackPausing Playback Memory On is not available with Audio CDsStep by Step Playback Fast Forward/Reverse Search Press the Play button to return to normal playbackPress the PAUSE/STILL button during playback You can not play the DVD in reverse slow motionTrack Playback Starting Playback at a Specific TrackWhen playback is stopped, press the Number buttons to Title/Chapter PlaybackStarting Playback at a Specific Title/Chapter Starting Playback at a Specific Disc Time Press the Search Mode button repeatedly three timesSpecific Time Playback Are onRepeat Playback Repeat playback is not available With some discsB Repeat Playback Repeat playback is not available with some DVDsPoint B must be later on the Disc than Point a Programmed Playback Random Playback While the Random screen appears, press the Play butAudio CD Sound Mode DVD LanguageSubtitle Language Subtitle menu will disappear after about 15 secondsCamera Angles Press the Angle button during playbackPress the Number buttons to enter the 4-digit password Parental Lock PasswordWhile playback is stopped, press the Setup button. Write down the password in case you forget itEnter the correct password Press the Number buttons to enter your 4-digit passwordLock settings you have made Press the Number 1 button to select LevelAccessing the Status Display Status DisplayPress the Number 2 button to select Video Auto is normally selectedPress the Number 3 button to select Audio Audio SettingsTo change the Digital OUT settings, go to step Press the corresponding Number button to select anAudio Settings cont’d Tles will not be shown Language SettingsPress the Number 1 button to select Language Disc menusLanguage Settings cont’d Press a Number button to select a settingLanguage Settings cont’d Language Country CodeOther Menu Settings Press the Number 5 button to select OthersHelpful Hints Helpful Hints cont’d Cleaning a Disc Care and MaintenanceCleaning the DVD Player Checking the LaserGlossary Specifications Limited Warranty DVD PlayerIndex 16-17Page Supplied Accessories