Philips DVD700AT, DVD700/P02 owner manual DVD Language, Audio CD Sound Mode

Audio Language/Sound Mode 31

The DVD Player allows you to select a Language for DVDs or a Sound Mode for Audio CDs.

DVD Language

1

OPEN/

POWERCLOSE

TITLEMENU RETURN

ENTER STOP

Press the AUDIO button during playback, then press the o/p buttons to select the desired language.

●The language can be changed only if multiple languages are avail- able on the DVD.

					Press the o/p buttons.
AUDIO	1 : E N G			/ 8
AUDIO	2 :	F	R E	/ 8	Press the o/p buttons again.

AUDIO 8 : J P N / 8	Press the o/p buttons again.
HELLO ➜	BONJOUR •••
AUDIO 1	AUDIO 2

AUDIO CD Sound Mode

1

Press the AUDIO button during playback, then press the o/p buttons until the sound mode you want appears.

1

REV

1

4

7

CLEAR

SETUP

SKIP

AUDIO

PLAY FWD

2 3

5 6

8 9

0+10

MODE DISPLAY

PAUSE/STILL REPEAT

SEARCH MODE	A-B
SUB TITLE	ANGLE

●When producers record an Audio CD, they record the sound on two channels - the left and the right. You can choose to hear the sound on the left channel, the sound on the right channel, or the sound on both channels (Stereo). You will select L-CH, R-CH, or STEREO.

Helpful Hints

• If a desired language is not shown

after pressing the o/p buttons sev-

eral times, the DVD does not have

that language.

AUDIO S T E R E O

AUDIO	R - C H
AUDIO	L	-	C H

Both right and left channels are active (stereo).

Only the right channel is active.

Only the left channel is active.

•	The display will disappear after
	about 15 seconds.
•	Some DVDs only allow you to
	change the language in the Disc
	menu.
•	When you use the DIGITAL AUDIO
	OUT COAXIAL jack, the sound mode
	of audio CDs cannot be changed.