Preparation
English
Connecting to Optional
Equipment
●A digital component with a
●The player outputs the surround sound signals from the DIGITAL OUT COAXIAL connectors.
Inserting batteries into the Remote Control
1Open the battery cover.
2Insert batteries (AA size) with the correct polarity as indicated by the + and - symbols
inside the battery compartment.
3Close the cover.
If your receiver has a MPEG 2 or Dolby Digital™ decoder,
1Connect the COAXIAL DIGITAL AUDIO OUT of the DVD player to the COAXIAL DIGITAL AUDIO IN on your receiver.
REAR |
|
|
|
SPEAKERS |
|
|
|
|
| REAR |
|
RECEIVER with | SPEAKERS |
| |
|
| ||
MPEG 2 or Dolby |
|
| |
Digital™ decoder |
|
| |
|
| OR |
|
|
| TO VIDEO IN | TO SCART IN |
| TO COAXIAL IN |
| |
| CVBS |
|
|
L |
|
|
|
|
|
| MAINS |
R |
|
|
|
AUDIO | COAXIAL | TV OUT |
|
OUT |
|
|
|
Notes:
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–To see the selected audio format of the current DVD in the Setup Menu, refer to “Setup Menu”.
–MP3 Audio is not available on the Digital Output.
- | + |
+ | - |
CAUTION!
–Remove batteries if they are exhausted or not to be used for a long time.
–Do not use old and new or different types of batteries in combination.
–Batteries contain chemical substances, so they should be disposed off properly and kept away from children.
Using the Remote Control
●Direct the remote control at the remote sensor of the DVD player.
●Do not drop the remote control.
●Do not leave the remote control near extremely hot or humid places.
●Do not spill water or put anything wet on the remote control.
Switching On
1Connect the AC power cord to the power outlet.
2Switch on the TV and DVD player.
3Set the TV to the correct Video IN channel. (eg. EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc. (Refer to your TV owner’s manual for detail) ➜The player display lights up and the default screen appears on the TV.
4If you are using an external equipment (eg. audio system or receiver), turn them on and select the appropriate input source that was used to connect to the DVD player output. Refer to the equipment owner’s manual for details.
10
3139 246 11941