Setup Menu, Basic Operations, General Setup

Setup Menu

English

1At Stop mode, press SYSTEM MENU to enter the Setup menu.

➜Setup menu appears on the TV screen.

2Press OK to enter to next submenu or confirm your selection.

3Use 1 2 keys to enter the submenu or return to previous menu.

4Use 34 keys to select the preferred option.

5Press SYSTEM MENU again to exit from the Setup Menu.

➜All settings will be stored in the DVD player’s memory even if the DVD player is switched to power off.

Some settings are essential during the start up of the DVD player. For example: DISC LOCK, PROGRAM, OSD LANGUAGE and SCREEN SAVER.

1Press SYSTEM MENU to enter the Setup menu.

2Press 34 keys to choose GENERAL SETUP menu.

3Press OK to confirm selection.

➜ Setting for GENERAL SETUP menu appears on the TV screen.

4To exit to the default screen, select MAIN PAGE.

When a disc is locked with a code, the code will be store in the DVD player’s memory.

During playback of the locked disc, the DVD player will prompt for the password.

1Press 34 keys to select the DISC LOCK in the General Setup menu and press OK to confirm.

2Enter the submenu by pressing the 2 key.

➜LOCK: Lock the disc being played.

➜UNLOCK: Unlock the disc.

3Press 1 key to return to General Setup menu.

Notes:

–When playback a locked disc, the DVD player will prompt to enter your password or 3308 (default) password.

–To change the password, refer to option PASSWORD in PREFERENCE menu.

1Select PROGRAM using 34 keys and press OK to open the menu.

2Enter the submenu by pressing the 2 key. ➜ SETUP:To access into Program mode.

3Press OK to enter into the Program page.

1Enter a valid track number using the numerical key pad.

2Press 1 234 keys to move the cursor to next selected position.

3Repeat above sequence to enter another track number until the whole program is completed.

4Press S or T to program more tracks.

1Press 1 234 keys to move the cursor to the track that you want to exclude.

2Enter an invalid track number.

3139 246 11941