Philips MCD300/93 manual Connecting antennas, Connecting a TV, Connecting the power cord

Page 8

English

Connections

Connecting antennas

Connect the supplied AM/MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.

AM/MW Indoor Loop Antenna

1

2

●Position the antenna as far as possible from a TV, VCR or other radiation source.

FM Indoor Antenna

●For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.

Connecting a TV

You must connect a TV to your DVD micro system in order to view the DVD/VCD playback.

IMPORTANT!

–There are various ways to connect the system to a TV.You only need to make one of the best connections, depending on the capabilities of your TV system.

–If COMPOMENT video output jacks or S-Video jack is used for video connection, the system’s Component setting will need to be set accordingly. Details are shown

under “Video Setup Page”.

●Connect the VIDEO jack to the video input jack on the TV using a video cable (yellow).

OR Option 1

Connect the S-VIDEOoutput jack to the S- Video input jack on the TV using an S-Video cable (not supplied).

OR Option 2

Use the component video cables (red/blue/ green) to connect the DVD micro system’s COMPONENT video output jacks to the corresponding component video input jacks (or labeled as Pr/Cr Pb/CbY or YUV) on the TV.

IMPORTANT!

– The progressive scan video quality is only possible when using Y Pb Pr and a progressive scanTV is required. (Proceed to page 47-48 for detailed Progressive Scan setup.)

TV

Option 2

Option 1

Note:

–To avoid magnetic interference, do not position the front speakers too close to your TV.

Connecting the power cord

After everything is connected properly, plug in the AC power cord to the power outlet.

Never make or change any connection with the power switched on.

42

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DVD Micro Theatre Page English Contents Tuner Clock/TimerSystem Menu Options General Information Connecting the speakers ConnectionsAntenna SpeakerConnecting the power cord Connecting antennasConnecting a TV Connecting additional equipment Connecting a digital amplifierConnecting an active subwoofer Recording digitalFunctional Overview Controls on the systemRemote control GOTO/STProg ZoomSLEEP/TIMER § ModeDISC/TUNER/AUX DIMInserting batteries into the Remote Control Setting up the TVEnglish Using the Remote Control to operate Player Getting StartedTo deactivate Progressive manually Setting the OSD Language Stop mode, press System on the remote controlPress System on the remote control again To exit the menuBasic Operations Switching the system on/offVolume control Sound Control Dimming the display screenDBB Dynamic Bass Boost English DSC Digital Sound ControlDisc Operations Playable DiscsRegion Codes WMA-CDs CD-ROMs with WMA tracks Picture Jpeg files on CD-RWUsing the Disc Menu Playing discsSelecting and searching Selecting a different track/chapterDifferent play modes REPEAT, Shuffle and Repeat A-B Repeat and ShuffleMP3/JPEG Repeat A-BProgramming tracks/chapters For DVDs/VCDs/CDsErasing program To reivew programDisplay information Playing in slow motionTo erase a program For DVDs/VCDsPlaying a Title DVD only Subtitle DVD onlyCamera Angle DVD only Playing MP3/WMA CD Playing Jpeg Picture CD Previewing pictures JpegZooming pictures Jpeg Rotating pictures JpegGeneral Setup TV Display default Normal/PSScreen Saver default On System Menu OptionsAudio Setup Spdif Setup default SPDIF/RAWDolby Digital Setup 3D ProcessingVideo Setup Post DRC default OnTV Mode default Interface ComponentDefault PreferenceParental KID SAFPassword Password SetupPassword Mode default On Tuner Tuning to radio stationsStoring preset radio stations Clock/Timer Setting the clockSetting sleep/wake-up timer Sleep timer settingSpecifications Troubleshooting ProblemSolution Clean the discTune in to the correct frequency Connect the antennas Troubleshooting Glossary
Top Page Image Contents