|
|
| Getting Started | |||
|
|
|
|
|
|
|
Step 3: Setting language |
| Setting the Audio, Subtitle and Disc |
|
| ||
| Menu language |
| ||||
| preference |
|
|
| ||
|
|
| ||||
You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead.The OSD language in the system menu will remain once selected.
Setting the OSD Language
1In the stop mode, press SYSTEM on the remote control.
➜ The system menu pops up on the TV screen.
2Press 1 2 to select “General Setup Page”.
3Use 1 2 3 4 on the remote to navigate in the menu.
Move to “OSD Lang” and press 2.
4Select a language and press OK.
To exit the menu
●Press SYSTEM on the remote control again.
1In the stop mode, press SYSTEM on the remote control.
2Press 1 2 to select “PREFERENCE PAGE”.
3Press 3 4 to highlight the following in the Preference Page.
–“Audio” (disc’s soundtrack)
–“Subtitle” (disc’s subtitles)
–“Disc Menu” (disc’s menu)
4Enter its submenu by pressing 2.
5Select a language and press OK.
6Repeat steps 3~5 for other language settings.
To exit the menu
●Press SYSTEM on the remote control again.
If you choose OTHERS in Audio, Subtitle or Disc Menu,
1Press 3 4 to highlight “OTHERS”.
2Press OK.
3When you are asked to enter a language code, input a language code by using the Numeric Keypad
4Press OK to confirm.
English
49