08Other connections
1Use an HDMI cable to connect the HDMI IN 1 to 3 interconnect on this receiver subwoofer to an HDMI output on your HDMI component.
Once this receiver subwoofer is properly connected to your HDMI component, the HDMI indicator (red) lights up on the display unit when you watch HDMI contents.
2Use an HDMI cable to connect the HDMI OUT interconnect on this receiver subwoofer to an HDMI interconnect on a
•The arrow on the cable connector body should be facing right for correct alignment with the connector on the player.
ENTER |
|
3 | Select ‘HDMI Mode’, then press ENTER. |
ENTER |
|
4 | Adjust the setting then press ENTER to |
confirm. |
|
•AMP Mode – Output an HDMI audio signal from this unit.
•Through Mode – Output an HDMI audio signal from a TV or plasma television.
The HDMI THROUGH indicator lights.
3Use the HDMI 1 to 3 button to select the HDMI input you’ve connected to (for example, HDMI 2).
You can also use the display unit INPUT SELECTOR to carry out this operation.
•Set the HDMI Mode in HDMI mode setting below to Through Mode if you want to hear HDMI audio output from your TV or plasma television (no sound will be heard from this receiver subwoofer).
•If the video signal does not appear on your TV or plasma television, try adjusting the resolution settings on your component or display.
HDMI mode setting
Specifies the routing of the HDMI audio signal out of this receiver subwoofer (amp) or through to a TV or plasma television. You cannot use a number of sound functions of this unit when HDMI Mode is set to Through Mode.
| Important |
• | RCV Press to set the remote control to receiver |
| control mode in order to operate the receiver |
| subwoofer (make sure that the LCD displays the |
| RECEIVER screen). |
1 | SETUP Press SETUP. |
| ENTER |
2 | Select ‘HDMI Setup’ then press ENTER. |
About HDMI
HDMI
HDMI has the capability to support standard, enhanced, or
HDMI, the HDMI logo and
36
En