Pioneer AS-LX70, SSP-LX70ST, SX-LX70W 10Additional information, Displayed Messages, Description

10Additional information

Displayed Messages

Message

192kHz PCM

SACD

DTS-HD

DTS Express

Dolby TrueHD

Dolby D+

Description

These messages are displayed when you operate a function incompatible with the audio source being played back.

No MIC	Displays when you press MCACC when the MCACC setup mic is not connected.
Muting	Displays when you press TEST TONE or MCACC while this unit is muted.
2ch Only	An operation is prohibited because it is only applicable to 2 channel sources, while the
	current source is a multichannel source.
Exit	Appears when a menu is automatically exited after a set period of inactivity.
HDMI Through	Displays when you change the Listening Mode, the volume level, or some sound settings
	when the HDMI Mode is set to Through Mode.
Unknown	The genre information for contents being played back on the HDD/DVD recorder cannot be
	obtained.
No Genre	There is no genre set for contents being played back on the HDD/DVD recorder.
HDMI C.ERR 2C*	The connected component is not compatible with synchronized genre mode.
Can’t use	• You tried to use Genre Sync Mode for a source component that does not support this
	function.
	• The source component is in a situation where Genre Sync Mode cannot be used.
	• You tried to use Genre Sync Mode when the input source of this unit is a source other than
	HDMI.
	• The operation is forbidden due to the surround settings.
	• When the volume level is over 51, some functions are restricted.
HDMI C.ERR 1**	Check if the HDMI cable is properly connected. If the cable is properly connected, this unit
	may be damaged. In such an event, please contact a Pioneer-authorized service center or
	your nearest dealer.
Noisy!	Background noise is too high to complete MCACC setup successfully.
Error MIC!	An error occurred during MCACC setup because the microphone is not connected or is not
	connected properly.
Error Speaker!	An error occurred during MCACC setup because the speakers are not connected or are not
	connected properly.
Over Temp	Try lowering the volume. If this problem is not fixed by removing and inserting the power
	cable, this unit may be damaged. In such an event, please contact a Pioneer-authorized
	service center or your nearest dealer.
OC Error1	Check whether the speaker cables are short-circuited. If the error message continues to be
OC Error2	displayed, contact your Pioneer authorized service center or your dealer for servicing.
*** BackUpERR	Contact your Pioneer authorized service center or your dealer for servicing.

46

En