Pioneer SX-LX70W, SSP-LX70ST, AS-LX70, HTP-LX70 manual Making the HDMI Control connections, Surr

HDMI Control

Chapter 9

HDMI Control

By connecting this unit to an HDMI Control-compatible Pioneer plasma television or the HDD/DVD recorder with an HDMI cable, you can control this unit from the remote control of a connected plasma television, as well as have the connected plasma television automatically change inputs in response to operations carried out on this unit.

Refer to the operating instructions for your plasma television for more information about which operations can be carried out by connecting via HDMI cable.

•You cannot use this function with components that do not support HDMI Control.

•We cannot guarantee this unit will work with HDMI Control-compatible components other than those made by Pioneer.

09

Making the HDMI Control connections

You can use synchronized operation for a connected plasma television and up to three other components (including a maximum of two recorders or players).

Be sure to connect the plasma television’s audio cable to the audio input of this unit.

•If you use a commercially available HDMI cable, check whether the cable supports the HDMI 1.3 standard. Otherwise, the HDMI Control function may not operate properly.

Important

•RCV Press to set the remote control to receiver control mode in order to operate the receiver subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below).

RECEIVER
SURR	ADV	F.S.
	SURR	SURR

From HDMI outut

Rear panel

HDMI

OUT IN 3 IN 2 IN 1

SYSTEM

From digital audio output (optical)

HDMI Control-compatible Pioneer HDD/DVD recorder, Blu-ray disc player or DVD player

Receiver subwoofer

Side panel

ANTENNA

L

AM LOOP

IN 1 IN 2

R

OPTICAL	FM
DIGITAL	UNBAL 75 Ω	ANALOG
		AUDIO IN

or

From Audio output

To HDMI input

HDMI Control-compatible

Pioneer plasma television

37

En