Pioneer AS-LX70, SX-LX70W 09HDMI Control, Setting the HDMI options, Setting the HDMI Control mode

09HDMI Control

•Connect the plasma television directly to this unit. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

HDMI Control-compatible

Pioneer plasma television

HDMI input

HDMI cable

HDMI output

Other amps or AV converter

HDMI input

HDMI cable

HDMI OUT

Important

•When connecting this system or changing connections, be sure to switch the power off and disconnect the power cord from the wall socket. After completing all connections, connect the power cords to the wall socket.

•After connecting this unit to an AC outlet, a 15-second initialization process begins. You cannot carry out any operations during initialization. The HDMI indicator on the display unit blinks during initialization, and you can turn this unit on once it has stopped blinking.

•To get the most out of this function, we recommend that you connect your HDMI component not to a plasma television but rather directly to the HDMI terminal on this unit.

Receiver subwoofer

•Only connect components you intend to use as a source to the HDMI input of this unit. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

HDMI Control-compatible

Pioneer plasma television

HDMI input

HDMI cable

HDMI OUT

Receiver subwoofer

HDMI IN
HDMI output	HDMI cable

Other amps or AV converter

38

Setting the HDMI options

You must adjust the settings of this unit as well as HDMI Control-compatible connected components in order to make use of the HDMI Control function. For more information see the operating instructions for each component.

Setting the HDMI Control mode

Choose whether to set this unit’s HDMI Control function On or Off. You will need to set it to Control On to use the HDMI Control function.

• When using a TV not manufactured by Pioneer, put this setting to Control Off.

1 SETUP Press SETUP.

ENTER
2	Select ‘HDMI Setup’ then press ENTER.
ENTER
3	Select ‘HDMI Ctrl’, then press ENTER.
ENTER
4	Adjust the setting then press ENTER to
confirm.

•Control On – Enables the HDMI Control function. When this unit’s power is turned off and you have a supported source begin playback while using the HDMI Control function, the audio and video output from the HDMI connection are output from the plasma television.

•Control Off – The HDMI Control is disabled. Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.

En