Additional information | 10 |
Tuner
Problem | Remedy |
Considerable noise in radio | • Connect the AM antenna (refer to Connecting up on page 8) and adjust the direction and |
broadcasts. | position for best reception. You may also connect an additional internal or external AM |
| antenna (refer to Connecting external antennas on page 35). |
| • Fully extend the FM wire antenna, position for best reception, and secure to a wall. You |
| may also connect an outdoor FM antenna (see Connecting external antennas on page 35). |
| • Turn off other equipment that may be causing the noise or move it further away. |
| • The tuning interval is incorrect for your country or region. See Changing the frequency |
| step on page 29 to switch the tuning interval. |
Auto tuning does not pick up some stations.
•The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more sensitive tuning, connect an outdoor antenna.
HDMI
Symptom | Remedy |
No picture or sound. | • This receiver is |
| also |
| • Depending on the connected source component, it’s possible that it will not work with |
| this receiver (even if it is |
| • If the problem still persists when connecting your HDMI component directly to your |
| monitor, please consult the component or monitor manual or contact the manufacturer for |
| support. |
No sound, or sound suddenly ceases.
•Check that the HDMI Mode setting is set to AMP Mode/Through Mode.
•If the component is a DVI device, use a separate connection for the audio.
•Check the audio output settings of the source component.
45
En
