Philips DVP5982 quick start Tip, AV Receiver

	Optional connections
Connecting to a stereo	Connecting to a digital AV
system	receiver

English

STEREO

AUDIO

IN

DIGITAL

AV Receiver

AUDIO

IN

DIGITAL

	TV OUT	DIGITAL			DIGITAL
		OUT		TV OUT
					OUT
HDMI OUT	COMPONENT VIDEO OUT	COAXIAL	AUDIO OUT		COAXIAL	AUDIO OUT
			HDMI OUT	COMPONENT VIDEO OUT

Stereo system has right/ left Audio In jacks

Receiver has a PCM, Dolby Digital or MPEG decoder

ASelect one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television.

BUse the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).

ASelect one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television.

BConnect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your receiver (cable not supplied).

CSet the DVD player’s digital output to PCM-Only or ALL depending on the capabilities of your receiver (see page 40 {Digital Output}).

Tip:

– If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

15

01-57_dvp5982_37_eng3.indd 15 2007-06-13 2:12:47 PM