Philips DVP5982 quick start Digital Output, All, PCM Only, Lpcm Output, 48K, 96K, Hdmi Audio Setup

DVD Menu Options (continued)

English

Digital Output

Set the Digital Output according to your optional audio equipment connection.

{All }

Select this if the connected device has a built-in multichannel decoder that supports one of the multichannel audio format (Dolby Digital, MPEG-2).

{PCM Only }

Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation).

{Off }

To deactivate the digital audio output. For example, if you use the AUDIO OUT jacks to connect to a TV or stereo system.

LPCM Output

If you connect the DVD player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’.

{48K }

Playback a disc recorded at the sampling rate of 48kHz.

{96K }

Playback a disc recorded at the sampling rate of 96kHz. This rate can only be achieved in Stereo-Classic (Flat) mode.

Tip:

–Discs are recorded at a certain sampling

rate. The higher the sampling rate, the better sound quality. LPCM Output can be selected only when PCM Only is activated.

HDMI Audio Setup

This function allows you to set the digital audio to output via HDMI cable.

{On }

To enable the HDMI digital audio to output via HDMI cable.

{Off }

To disable the HDMI digital audio to output via HDMI cable.

Tips:

–{Digital Output} and {LPCM Output} are only applicable when {HDMI Audio Setup} is set to {Off}.

–If {HDMI Audio Setup} is set to {Off}, no sound could be hear through HDMI connection.

–If {HDMI Audio Setup} is set to {On}, it is possible to hear PCM audio fi le via coaxial connection.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

40

01-57_dvp5982_37_eng3.indd 40 2007-06-13 2:13:00 PM