English
Setup Menu Options (continued)
Audio Setup Page (underlined options are the factory default settings)
Digital Audio Setup
HDMI Audio Setup
Continued...
{ LPCM Output } – { 48K }
Select this to play disc recorded at sampling rate of 48 kHz.
{96K }
Enable 96 kHz output on digital audio if the amplifier/receiver is compatible with high sampling rate audio (88.2 / 96 kHz). However, if the sound output is distorted or there is no sound, change the setting to ‘48K’.
Note: LPCM Output can only be selected when { PCM Only } is activated. The higher the sampling rate, the better the sound quality.
This setting is only required if you are using the HDMI OUT socket to connect your TV or other display device.
| { On } | – Enable audio output through HDMI |
| { Off } | connection. |
| – Disable HDMI audio output. In this | |
|
| case, an alternative audio connection is |
|
| required from this unit to your TV. |
|
| |
Sound Mode | Select the type of preset digital sound effect that can match the | |
| disc’s content or optimize the sound of the musical style you are | |
| playing. |
|
| { 3D } | – It provides a virtual surround sound |
|
| experience through the left and right |
|
| audio channels. Available options are: |
|
| { Off }, { Living Room }, { Hall }, |
|
| { Arena } and { Church }. |
| { Movie Mode } | – Movie sound effects. Available options |
|
| are: { Off }, { |
|
| { Drama } and { Concert } effect. |
| { Music Mode } | – Musical sound effects. Available options |
are: { Off }, { Digital }, { Rock }, { Classic } and { Jazz }.
36
1dvp6620_eu_eng.indd 36 |