Philips DVP6620/12 manual Resolution, 480p, 576p, 720p, Wide Screen Format, Pillar Box, Super Wide

English

Setup Menu Options (continued)

Video Setup Page (underlined options are the factory default settings)

HDMI Video Setup It provides the picture settings to enhance the appearance and picture quality for disc playback. This feature is only applicable if

you have connected this unit to a HDMI-compatible TV/device.

{ Resolution }	– Select a suitable video resolution that is
	compatible with your TV display
	capability.
	{ Auto }
	It detects and selects the best
	supported video resolution
	automatically.
	{ 480p, 576p, 720p, 1080i }
	Manually select a video resolution. ‘p’
	for progressive and ‘i’ for interlaced.

Note: If the selected resolution is not supported by your HDMI/ DVI TV, a black screen will appear. In this case, wait for 5 seconds for auto recovery or use the composite (yellow) video cable to connect this unit and your TV. Turn on your TV to the correct input channel for the composite video and adjust the resolution setting to 480p/576p.

{Wide Screen Format }

–Select a suitable screen display.

Note: This feature is only available if you have selected { 16:9 } in { TV Display } setup.

{ 4:3 Pillar Box }

Display the 4:3 picture disc on the wide- screen TV without stretching. Black bars will be shown on the both sides of the TV.

{ Super Wide }

Display the 4:3 picture disc on the wide-screen TV with non-linear stretching (centre position of the screen is stretched less than the side).

{ Off }

No aspect ratio adjustment is made when this option is selected.

Note: { Super Wide } and

{ 4:3 Pillar Box } is only applicable when this unit’s resolution is set to 720p or 1080i.

40

1dvp6620_eu_eng.indd 40 2008-08-06 2:21:26 PM