• On the TV, the component video in jacks may be labeled YUV or Y Pb/Cb Pr/Cr and may be green, blue, and red.
• Set VIDEO OUTPUT to YPBPR. Details are on page 34.
• If your TV has a single Audio In jack instead of separate left/right Audio In jacks, you will need a different audio cable. You need a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the Player to the single Audio In jack on your TV. See your electronics retailer for details.
4 Turn on the TV power. Set the TV to the correct Component Video In channel. See your TV owner’s manual for details. Or, change channels at the TV until you see the blue Philips DVD background screen or the Player’s screen saver on the TV.
Helpful Hints
Y
1
Y
Pb
Pr
VIDEO
OUT
1 Connect the Player’s green, blue, and red Y Pb Pr (VIDEO OUT) jacks to the corresponding COMPONENT VIDEO IN jacks on the TV. Use component video cable (not supplied).
2 Connect the Player’s red and white AUDIO OUT (right and left) jacks to the right/left AUDIO IN jacks on the TV. Use the supplied audio cables. Match the cable colors to the jack colors. The red jack is the Right audio channel and the white jack is the Left audio channel.
3 Plug the power cords of the Player and the TV into an active power outlet.
Press down POWER ON/OFF on the front of the Player to turn on the Player.
LEFT AUDIO IN
Pb/Cb
RIGHT AUDIO IN Pr/Cr
3
Connecting to a TV Only
TV has Component Video In Jacks (green, blue, and red)
Back of TV
(example only)
12 Hookups (cont’d)
2