•[TT Time] : Title time.
•[Ch Time] : Chapter time.
•[Disc Time] : Disc time.
•[Track Time] : Track time.
3Enter the time of the scene, then press OK.
Repeat play a speci c section
Select sections of audio or video for repeat playback.
1During playback, press
INFO.
2Select [Repeat AB] in the menu.
3Press OK to mark the start point.
4Press OK again to mark the end point. » Repeat play starts.
•To cancel repeat 
INFO, select [Repeat AB] > [Off], then press OK.
Note
•Repeat play is only possible within a track/ chapter.
Play from radio
The home theater can store up to 40 radio stations.
1Check that the FM antenna is connected.
2Press RADIO.
»“AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press 
.
3Press the following buttons to control play:
Button | Action |
/ | Selects a preset radio station. |
/ | Searches for a radio station. |
| Fine tunes a radio frequency. |
Press and hold to erase the preset radio station.
Press to stop the installation of radio stations.
PROGRAM Manual: Press once to access program mode, and press again to store the radio station. Automatic: Press and hold for ve seconds to reinstall radio stations.
|
| Note |
|
|
|
|
|
| English |
• | AM and digital radio are not supported. |
| ||
• If no stereo signal is detected, you are |
|
| ||
| prompted to install the radio stations again. |
|
| |
• For the best reception, place the antenna away |
|
| ||
| from the TV or other sources of radiation. |
|
| |
|
|
| ||
|
|
|
|
|
Change tuning grid
In some countries, you can switch the FM tuning grid between 50 kHz and 100 kHz. Changing tuning grid erases all preset radio stations.
1Press RADIO.
2 | Press |
| . |
|
|
| |||
3 | Press and hold | until ‘GRID 9’ (50 kHz) | ||
| or ‘GRID 10’ (100 kHz) is displayed. | |||
Play audio fromTV or other devices
Press AUDIO SOURCE repeatedly to select the audio output of the connected device (see ‘Connect audio from TV or other devices’ on page 8).
Create MP3 audio les
Use the home theater to convert audio CDs into MP3 audio les.
1Insert an audio CD (CDDA/HDCD) into the home theater.
2Connect a USB storage device to the home theater.
3When audio is played, press CREATE MP3.
4Select [Yes] and press OK to con rm.
EN 11