Philips HTS3530 user manual Change settings, Access the setup menu

CREATE MP3

OPTIONS		TRACK
		Track01	04:14
Speed	Normal
		Track02	04:17
Bitrate	128kbps
		Track03	03:58
CRT ID3	Yes
		Track04	04:51
Device	USB1
		Track05	03:53
SUMMARY		Track06	04:09
Select Track	0	Track07	04:38
Time	00:00
Start	Exit	Select All	Deselect All

5Select the settings in the [OPTIONS] panel, then press OK.

•[Speed] : Selects the write-to- le speed.

•[Bitrate] : Selects the conversion quality.

•[CRT ID3] : Copies information on the tracks in the MP3 les.

•[Device] : Selects the USB device which you use to store the MP3 les.

6Press to access the [TRACK] panel.

7Select an audio track, then press OK.

•[Select All] : Selects all tracks.

•[Deselect all] : De-selects all tracks.

8Select [Start] in the menu to convert, then press OK.

»A new folder is created in the USB storage device to store all the new MP3 audio les.

•To exit the menu, select [Exit] and press OK.

Note

•During the conversion process, do not press any buttons.

•DTS CDs and copy-protected CDs cannot be converted.

•Write-protected or password-protected USB storage device cannot be used to store MP3 les.

6Change settings

This section helps you to change the settings of your home theater.

Caution

•Most of the settings are already con gured with the best value for the home theater. Unless you have a speci c reason to change a setting, it is best to leave it at the default value.

Access the setup menu

1Press SETUP.

» The following menu appears.

Symbol Description

[General Setup]

[Audio Setup]

[Video Setup]

[Preference Setup]

2Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theater.

3PressBACK to return to the previous menu, or pressSETUP to exit.

Note

•You cannot change a setting that is grayed out.

12EN