Change general settings
1Press
SETUP.
2Select [General Setup], then press OK.
3Select and adjust the following settings:
•[Disc Lock] : Restricts play to disc. Password (PIN code) is required to unlock the disc before play.
•[Display Dim] : Changes the brightness of the display panel.
•[OSD Language] : Selects the on- screen display menu language.
•[Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode).
•[Sleep Timer] : Sets a sleep timer to switch the home theater to standby after a speci c time.
•[Auto Standby] : Enables or disables auto standby. If enabled, the home theater switches to standby after 30 minutes of inactivity (for example, in pause or stop mode).
•[DivX® VOD Code] : Displays the DivX VOD registration code for the home theater.
4Press OK to con rm your choice.
Note
•Before you purchase DivX videos and play them on the home theater, register the home theater on www.divx.com using the DivX VOD code.
Change audio settings
1Press 
SETUP.
2Select [Audio Setup], then press OK.
3Select and adjust the following settings:
•[Speakers Volume] : Sets the volume of each speaker to obtain the ideal audio balance.
•[Speakers Delay] : Sets the delay time for center and rear speakers to obtain an equal audio transmission from all the speakers.
• [HDMI Audio] : Enables or disables |
|
HDMI audio output for the TV. |
|
• [Audio Sync] : Sets a delay for audio | English |
output when you play a video disc. | |
4 Press OK to con rm your choice. |
|
Note
•For settings related to HDMI, the TV must be connected through HDMI.
Change video settings
1 Press 
SETUP.
2Select [Video Setup], then press OK.
3Select and adjust the following settings:
•[TV System] : Selects a TV system that is compatible with the TV.
•[TV Display] : Selects a picture display format to t the TV screen.
•[Progressive] : Enables or disables progressive scan mode.
•[Picture Settings] : Selects a prede ned color setting.
•[HD JPEG] : Enables or disables display of high de nition JPEG images.
•[HDMI Setup] : Selects HDMI video resolution and the wide screen display format for the TV. The Wide Screen Display option is only available for 16:9 wide screen TV display setting.
4Press OK to con rm your choice.
Note
•The best setting is automatically selected for the TV. If you need to change the setting, ensure that the TV supports the new setting.
•Some video settings depend on the video source, ensure that the disc and the TV support the setting or feature.
•For settings related to HDMI, the TV must be connected through HDMI.
•For settings related to progressive or component video, the TV must be connected through Component Video.
EN 13