Sony MHC-DX7, MHC-BX9, MHC-DX9, MHC-DX5 manual Saving the power in standby mode

Page 9

To tune in a station with a weak signal

Press + or – (TUNING +/– on the remote) repeatedly to tune in the station manually.

To set another station to the existing preset number

Start over from step 1. After step 3, turn SHUTTLE until it clicks to select the preset number you want to store the other station.

You can add a new preset number after the last preset number.

To erase the preset station

1Hold down TUNER MEMORY until a preset number appears in the display.

2Turn SHUTTLE until it clicks to select the preset number you want to erase.

Select “ALL ERASE” when you want to erase all the preset stations.

3Press ENTER. “COMPLETE” appears.

When you erase a preset number, the preset number decreases by one and all preset numbers following the erased one are renumbered.

To change the AM tuning interval

(Except for the European and Middle Eastern models)

The AM tuning interval is factory set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER button, turn the power back on. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure.

Tip

The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs.

Saving the power in standby mode

(For European and North American models only)

You can lower the power consumption to minimum (Power Saving Mode) and save energy in standby mode.

?/1

(Power)

DISPLAY

,Press DISPLAY repeatedly when the power is off. Every time you press the button, the system switches as follows:

t Demonstration t Clock Power Saving Mode T

The system is turned on/off by pressing ?/1.

Tips

•?/1 indicator and timer indicator (when the timer is set) light up even in the Power Saving Mode.

•The timer works in the Power Saving Mode.

Note

You cannot set the time in the Power Saving Mode.

To cancel the Power Saving Mode

Press DISPLAY once to show the demonstration, twice to show the clock

display.9

Image 9

Contents Mini Hi-Fi Component System For MHC-BX9/BX7/BX5 About this manualTable of Contents Hooking up the system Connect the speakersConnect the surround speaker MHC-BX7/DX7 only Connect the FM/AM antennas Connect the power cord to a wall outletTo connect optional components To deactivate the demonstrationHooking up the system When carrying this systemTo attach the front speaker pads Positioning the speakers MHC-BX7/DX7 onlyTo change the time Setting the timeRepeat steps 1 to 4 to store other stations Presetting radio stationsSaving the power in standby mode Normal play Playing a CDPress Z OPEN/CLOSE and place a CD on the disc tray Press one of the Disc 1~3 buttonsDo this Basic OperationsRecording a CD CD Synchro RecordingTo stop recording Listening to the radio Preset TuningTo listen to non-preset radio stations Recording from the radioListening to the radio X 4 Playing a tapePlaying a tape Press nNSearching for the beginning of a track AMS Recording from a tape High-speed DubbingTo stop dubbing Stop mode Using the CD displayPress Display During normal playbackTo cancel Repeat Play Playing the CD tracks repeatedlyRepeat Play To cancel Shuffle Play Shuffle PlayTo select a desired CD Programming the CD tracks 4 5Program Play Programming the CD tracks To cancel Program PlayPress nN to start playing the source to be recorded Recording on a tape manually8 6 10 12 Recording a CD by specifying track orderProgram Edit Press . or until the track you want appears in the displaySelecting tape length automatically To cancel Program EditTo check the order Tape Select EditFlashing part of a CD Looping part of a CDLoop FlashTo listen through the headphones Adjusting the soundFor a powerful sound Groove To reinforce lower bass sound V-GROOVESelecting the audio emphasis To cancel the effectSelecting the effect from music menu To select User FileSelecting the surround effect Changing the spectrum analyzer displayPress Spectrum Press SurroundAdjusting the graphic equalizer 2,4 Using the Radio Data System RDSReceiving RDS broadcasts Locating a station by program type PTYUsing the Radio Data System RDS To cancel PTY searchList of program types PTY Singing along Karaoke Except European and North American modelPress Karaoke PON When you are done Mixing and recording soundsSinging along Karaoke Daily Timer Sleep TimerFalling asleep to music Waking up to musicTo check the setting To cancel the timer operationWaking up to music Insert a recordable tape into deck B Turn off the power Timer-recording radio programsSet the time to start recording Press . or repeatedly to select REC, then press EnterConnecting an MD deck for listening to music Connecting an MD deck for digital recordingTo the audio output of the VCR Connecting a VCRConnecting external antennas FM antennaAM antenna Precautions Troubleshooting PrecautionsGeneral CD Player SpeakersTroubleshooting Tape DeckTuner Audio Power Specifications MHC-BX7 USA models only SpecificationsMHC-BX5 USA models only Amplifier sectionCD player section SpecificationsTape player section Tuner sectionSurround speaker SS-RS150 for MHC-BX7 except Canadian model GeneralV, W, X, Y, Z Index