Step 2: Setting the time
3 Press ENTER.
The minute indication flashes.
You must set the time before using the timer functions.
The clock is on a
The
|
|
| 1 |
2,4 | Ï | P p | 3,5 |
= | + |
0)
( P p
4 Press . or > repeatedly to set the minute.
5 Press ENTER.
The clock starts working.
Tip
If you’ve made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Press . or > repeatedly to select
SET CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
Note
|
| The clock settings are canceled when you disconnect |
1 |
| |
Press CLOCK/TIMER SET. | the power cord or if a power failure occurs. | |
|
The hour indication flashes.
2 Press . or > repeatedly to set the hour.
7