Recording a CD by specifying track order
— Program Edit
You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape.
DOLBY NR
?/1
(Power) 2 4 1 EDIT 3
11
x5 8 6 1
10 12 5
hH S s
lL
j J
H S s
CHECK
1 Place a CD and insert a recordable tape into deck B
2 Press CD.
3 Press PLAY MODE repeatedly until “PROGRAM” scrolls and “PGM” appears in the display.
4 Press one of the DISC 1~3 buttons to select a CD.
To program all the tracks on a CD at once, proceed to step 6 while “AL” appears in the display.
5 Press . or > until the track you want appears in the display.
Disc tray | Total playing time |
number | (including selected track) |
PGM
Track number
6 Press ENTER.
The track(s) is(are) programmed. The program step number appears, followed by the total playing time.
7 To program additional tracks to be recorded on side A, repeat steps 4 to 6.
Skip step 4 to select tracks from the same disc.
8 Press X to insert a pause at the end of side A.
“P” appears in the display and the total playing time resets to “0.00” in the display.
24