Philips HTS3000/12 Important notes for users in the U.K Mains plug, How to connect a plug, Italia

Page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fi tted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.

3Refi t the fuse cover.

If the fi tted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fi tted in its place.

If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

–Connect the blue wire to the terminal marked N or coloured black.

–Connect the brown wire to the terminal marked L or coloured red.

–Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Italia

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio HTS3000, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven, The Netherlands

Norge

Typeskilt fi nnes på apparatens underside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

ATTENTION!

For Customer Use:

Read carefully the information located at the bottom or rear of your DVD Home Theatre System and enter below the Serial No. Retain this information for future reference.

Model No. HTS3000

Serial No. _______________

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents DVD Hometheatre System Copyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plug ItaliaKlass 1 laseraparat Disposal of your old product Nederlands Deutsch Español IndexFrançais English Table of contents Table of contents Cleaning discs Setup precautionsAccessories supplied General InformationMain Unit Remote Control Title SleepDisc Menu PREVí / Next ëUsing the remote control Basic Connections Placing the speakersOption Connecting to TVOption Main Unit rear Connecting speakers and subwoofer Fi x the claw Connecting the FM and AM/MW antennasConnecting the power cord Into the slotDVD Recorder/VCR rear Optional ConnectionsTV rear Cable/Satellite Box rearGetting Started AM/MW bandOn-screen display OSD language Setting language preferencesGeneral Setup Page appears Audio, Subtitle and Menu language for DVD playbackSetting the TV Display Wide Screen Select this if you have a wide-screen TVBefore you start Setting the speakers’ channelsSetup Press To highlight Speakers Volume and press PressPlaying a disc Disc OperationsPlayable discs Selecting various repeat/ shuffle functions Pausing playbackBasic playback controls Searching backward/forwardTo select a playback feature or item Other playback features for video discs DVD/VCD/ SvcdUsing the Disc Menu To access or remove the menu Press Disc Menu on the remoteUse Switching camera anglesViewing playback information Zooming in/outFor VCD changing the audio channel Setting the delay times for audio playbackFor VCDs with Playback Control PBC feature version 2.0 only Press Audio SyncTrack Digest Preview function VCD/SVCD onlyPress Disc Menu Disc IntervalIf the disc main menu contains various Playing a MP3/ WMA discDisc menu appears on the TV Supported file format Playing a Jpeg image file slide showPreview function Zoom picturePlayback skips to the time entered Playing a DivX discTo stop simultaneous playback, press Disc Menu followed by To access Setup Menu OptionsAccessing the setup menu Unlock Disc LockLock Display DimCD Upsampling Speakers VolumeSpeakers Delay Ntsc Picture SettingTV Type MultiLast Setting ParentalPassword DivX Subtitle Default CyrillicUsing auto install Tuning to radio stationsPresetting radio stations Radio OperationsUsing automatic preset Selecting a preset radio stationDeleting a preset radio station Using manual presetTo turn off the volume temporarily Press Mute % Sound and Volume ControlsVolume control Selecting digital sound effectsSetting the Sleep timer Other FeaturesInstalling the latest software Never unplug or turn off this unit during the upgradeSpecifications AmplifierTroubleshooting Problem General SolutionUnit does not start Problem Playback SolutionNot able to select some items in the setup/system menu PlaybackGlossary Fi le extension ‘WMA’

HTS3000/12 specifications

The Philips HTS3000/12 is a versatile home theater system designed to enhance your audio-visual experience. This innovative device combines the functionality of a DVD player with a powerful surround sound system, establishing itself as a worthy addition to any entertainment setup.

At the heart of the HTS3000/12 lies its advanced DVD playback technology. This system supports a wide range of disc formats, including DVD, VCD, and CD, ensuring you can enjoy your favorite movies and music without compatibility concerns. The player is equipped with a quick load feature, allowing for speedy access to your entertainment, making it ideal for impromptu movie nights.

One of the main features of the HTS3000/12 is its 5.1 channel surround sound system, which immerses viewers in an enveloping audio experience. With powerful speakers strategically designed for optimal sound distribution, listeners can enjoy crisp dialogues, impressive sound effects, and rich musical scores, ensuring that every corner of the room is filled with high-quality sound. The system includes a dedicated subwoofer that provides deep bass, intensifying the overall listening experience during action-packed scenes.

The HTS3000/12 also includes Progressive Scan technology, which enhances picture quality by delivering sharper and clearer images. This is particularly noticeable when watching high-definition content, making the viewing experience more enjoyable. Additionally, the system features an HDMI output, offering easy connectivity to modern televisions and ensuring the best possible audio and video transmission.

Another noteworthy characteristic of this home theater system is its range of audio formats supported. The HTS3000/12 provides playback for various audio file formats, including MP3 and WMA, allowing users to enjoy their digital music collections with ease. Furthermore, the built-in radio tuner provides access to local FM stations, perfect for those who enjoy listening to radio broadcasts.

The design of the Philips HTS3000/12 is sleek and modern, fitting seamlessly into any home décor. The user-friendly interface, combined with a well-organized remote control, makes it easy to navigate through menus and settings without any hassle.

In conclusion, the Philips HTS3000/12 home theater system stands out with its impressive performance, versatile playback options, and elegant design. It is a complete solution for anyone looking to experience their favorite films and music in a whole new way, making it a valuable addition to any home entertainment setup.
Top Page Image Contents