������
������
����

Installation Preparation

PREPARE DISHWASHER ENCLOSURE

•The dishwasher must be installed so that drain hose is no more than 10’ in length for proper drainage.

This Wall Area must be Free of Pipes or wires

34-1/2" ± 1/2"

 

 

24"

Underside of

5"

4"

5" 4"Min.

Countertop

 

 

 

WARNING

To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation.

to Floor

 

Cabinets

 

 

 

6"

Square

 

and

17 5/8" Min.

Plumb

Floor MUST

18" Max.

 

Plumbing and Electric Service

be Even with

Room Floor

Must Enter Shaded Area

Figure A

CLEARANCES: When installed into a corner, allow 2” min. clearance between dishwasher and adjacent cabinet, wall or other appliances. Allow 25-5/8" min. clearance from the front of the dishwasher for door opening. Figure B

Countertop

Dishwasher

25-5/8"

•The rough cabinet opening must be at least 24" deep, 17-5/8" to 18" wide and approximately 34-1/2" high from floor to underside of the countertop.

Clearance for Door

Opening 2" Minimum

Figure B

DRAIN REQUIREMENTS

•Follow local codes and ordinances.

•Do not exceed 10’ distance to drain.

•Do not connect drain lines from other devices to the dishwasher drain hose.

NOTE: Air gap must be used if waste tee or disposer connection is less than 18" above floor to prevent siphoning.

DETERMINE DRAIN METHOD

The type of drain installation depends on the following questions.

■ Do local codes or ordinances require an air gap? ■ Is waste tee less than 18" above floor?

If the answer to either question is YES, Method 1 MUST be used.

• If the answers are NO, either method may be used.

CABINET PREPARATION

•Drill a 1-1/2" diameter hole in the cabinet wall within the shaded areas shown in Figure A for the drain hose connection. The hole should be smooth with no sharp edges.

IMPORTANT: When connecting drain line to disposer, check to be sure that drain plug has been removed. DISHWASHER WILL NOT DRAIN IF PLUG IS LEFT IN PLACE.

Figure C

Method 1 – Air Gap with Waste Tee or Disposer

An air gap must be used when required by local codes and ordinances. The air gap must be installed according to manufacturer’s instructions.

���

���

����

����

Figure D

Method 2 – Drain Hose Routing

When not using an air gap, the drain hose must be routed to form a high loop of at least 32" to prevent siphoning. See Step 15 on page 10.

CAUTION:

An air gap MUST BE USED if the drain hose is connected to waste tee or disposer lower than 18" above the floor level. Failure to provide the proper drain connection height with an air gap or 32" minimum high drain loop will result in improper draining of the dishwasher, which may cause damage.

4

Page 3 Page 5
Page 4
Image 4
GE ZBD1870NSS Prepare Dishwasher Enclosure, Drain Requirements, Determine Drain Method, Cabinet Preparation
Page 3 Page 5

ZBD1870NSS specifications

The GE ZBD1870NSS dishwasher represents an impressive blend of functionality and modern design, tailored to elevate the kitchen experience. It is part of GE's well-regarded line of small space appliances, making it a perfect solution for urban dwellers or those with compact kitchens.

This model boasts a sleek stainless steel finish, giving it a contemporary look that complements various kitchen decors while also ensuring durability and easy maintenance. Its compact size doesn’t sacrifice capacity, as it can hold up to eight place settings. This functionality makes it versatile for both small gatherings and everyday use.

One of the standout features of the GE ZBD1870NSS is its advanced wash system. The dishwasher utilizes a high-efficiency washing technology that covers all angles, ensuring thorough cleaning while reducing water usage. The system is equipped with multiple wash cycles, including a dedicated cycle for delicate items and a heavy-duty cycle designed for tackling tough stains and baked-on residues.

In addition to its impressive cleaning capabilities, the GE ZBD1870NSS incorporates a sophisticated drying system. The stainless steel interior promotes optimal drying performance and helps to reduce the incidence of spots. Furthermore, it features a heated dry option that speeds up the drying process, making it a convenient choice for busy households.

The dishwasher also boasts a convenient top control panel for seamless operation and easy access. Users can choose from various settings with just a touch, ensuring that each load can be customized based on specific needs. The delayed start option is another thoughtful addition, allowing users to program the machine to operate at a more convenient time.

Energy efficiency is another critical aspect of the GE ZBD1870NSS. The appliance is ENERGY STAR certified, meaning it meets strict criteria for energy consumption, which translates into savings on utility bills and a lower environmental footprint.

Noise levels are considered during the design, and the GE ZBD1870NSS operates at a quiet 55 decibels, ensuring that it won’t disrupt daily activities or conversations in the kitchen.

In summary, the GE ZBD1870NSS combines practical features with modern technology, making it an appealing choice for those seeking an efficient, stylish, and reliable dishwasher. Its compact design, advanced wash system, and energy-efficient operation are just a few highlights that set it apart in the market.
Top Page Image Contents