GE ZBD1870NSS Slide Dishwasher Partially Into Cabinet, Install Drain Hose Through Cabinet

Models: ZBD1870NSS

1 14
Download 14 pages 10.95 Kb
Page 9
Image 9
STEP 6 POSITION WATER LINE AND HOUSE WIRING

Installation Instructions

STEP 6 POSITION WATER LINE AND HOUSE WIRING

Position water supply line and house wiring on the floor of the opening to avoid interference with base of dishwasher and components under dishwasher.

STEP 8 SLIDE DISHWASHER PARTIALLY INTO CABINET

DO NOT PUSH AGAINST FRONT PANEL WITH KNEES. DAMAGE WILL OCCUR

• Slide dishwasher into the opening a few inches at a time.

4"

STEP 8 SLIDE DISHWASHER PARTIALLY INTO CABINET6"

House

WaterLine Wiring STEP 7 INSTALL DRAIN HOSE THROUGH CABINET

Figure P

STEP 7 INSTALL DRAIN HOSE THROUGH CABINET

Stand the dishwasher upright and position in front of the opening. Insert drain hose into cabinet wall hole. If a power cord is used, guide the end through a separate hole.

 

Maximum

 

Drain Hose

Insulation

Length 10”

 

Blanket

Water

 

Line

 

Drain

 

Hose

 

House

 

Wiring

 

Power Cord

 

(If Used)

Figure Q

 

TIP: Position water line and house wiring on the floor to avoid interference with base of dishwasher.

Reposition Dishwasher by Grasping Both Sides

Do Not Push Against With Hands. Front Door Panel With

Knee. Damage to The Door Panel Will Occur.

Figure R

As you proceed, pull the drain hose through the opening under the sink. Stop pushing when the dishwasher is a few inches forward of adjacent cabinetry.

Make sure drain hose is not kinked under the dishwasher and there is no interference with the water line and wiring or any other component.

9

Page 9
Image 9
GE ZBD1870NSS Slide Dishwasher Partially Into Cabinet, Install Drain Hose Through Cabinet, Installation Instructions