|
| Basic Connections (continued) | |||
|
|
|
|
|
|
| Step 3: Connecting FM/MW |
| Step 4: Connecting the | ||
| antennas |
|
| power cord | |
fix the claw into the slot
➠ | TV |
| FM |
| antenna |
| 2 |
MW | 1 |
antenna |
|
| L |
L | R |
|
R | DVD system |
English
1Connect the supplied MW loop antenna to the MW socket. Place the MW loop antenna on a shelf, or attach it to a stand or wall.
2Connect the supplied FM antenna to the FM socket. Extend the FM antenna and fix its ends to the wall.
For better FM stereo reception, connect an external FM antenna (not supplied).
Helpful Hints:
–Adjust the position of the antennas for optimal reception.
–Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.
After everything is connected properly, plug the AC power cord into the power outlet.
The red Eco Power LED on the DVD system will light up. Never make or change any connections with the power switched on.
Helpful Hint:
–Refer to the type plate on the rear of the subwoofer for identification and supply ratings.
11
11 | 12/9/05, 11:30 AM 3139 115 2xxx1 |