E n g l i s h
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.
Problem
No power.
No picture.
Completely distorted picture or black/white picture.
The aspect ratio of the screen cannot be changed even though you have set the TV display.
No sound or distorted sound.
Cannot activate some features such as Angles, Subtitles, or
Not able to select some Items in the setup/system menu.
Solution
–Check if the AC power cord is properly connected.
–Press the STANDBY ON on the front of the DVD system to turn on the power.
–Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen.
–Press DISC on the remote control.
–If this happens when you are changing the setting of the ‘TV TYPE’, wait for 15 seconds for auto recovery.
–Check the video connection.
–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
–Clean the disc.
–The aspect ratio is fixed on the DVD disc.
–Depending on the TV, it may not be possible to change the aspect ratio.
–Adjust the volume.
–Check the speaker connections and settings.
–Make sure that the audio cables are connected and press the SOURCE button to select the correct input source (TV or AUX/DI, for example) to choose the equipment that you want to hear through the DVD system.
–The features may not be available on the DVD.
–Changing the language for the sound or subtitle is prohibited on this DVD.
–Press STOP button twice before selecting the setup/system menu.
–Depending on the disc availability, some menu items cannot be selected.
Need Help? Visit us at www.philips.com/support
42
42 | 12/9/05, 11:31 AM 3139 115 2xxx1 |