Pan Scan, Ntsc, Letter Box, Multi, Wide Screen

4:3 Letter Box 16:9 Wide Screen

Picture Setting

4:3 Pan Scan

Video Setup Page

TV Type TV Display

3 Press 34to highlight { TV Display }, then press 2.

In disc mode, press SETUP.

2 Press 2 repeatedly to select { Video Setup Page }.

The colour system of the DVD system, DVD and TV should match. Only then will it be possible to play a DVD on this system. Before changing the TV system, determine the colour system of your TV.

Setting the TV Display

Set the aspect ratio of the DVD system according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.

Selecting the matching colour system

Getting Started (continued)

E n g l i s h

3 Press 34to highlight { TV Type }, then press 2.

Video Setup Page

TV Type

TV Display

Picture Setting

PAL

NTSC Multi

	4 Press 34 to highlight one of the options	4 Press 34 to highlight one of the options
	below:	below:
	{ PAL }	{ 4:3 Pan Scan }
	Select this if the connected TV has the PAL	{ 4:3 Pan Scan }
	Select this if the connected TV has the PAL	Select this if you have a
	colour system. It will change the video signal of	Select this if you have a
	colour system. It will change the video signal of	conventional TV and want
	an NTSC disc and output it to PAL format.	conventional TV and want
	an NTSC disc and output it to PAL format.	both sides of the picture to be trimmed or
		both sides of the picture to be trimmed or
	{ NTSC }	formatted to fit your TV screen.
	{ NTSC }
	Select this if the connected TV has the NTSC	{ 4:3 Letter Box }
	colour system. It will change the video signal of	Select this if you have a
	a PAL disc and output it to NTSC format.	Select this if you have a
	a PAL disc and output it to NTSC format.	conventional TV. In this case, a
		conventional TV. In this case, a
	{ Multi }	wide picture with black bands on the upper
	{ Multi }	and lower portions of the TV screen will be
	Select this if the connected TV is compatible	and lower portions of the TV screen will be
	Select this if the connected TV is compatible	displayed.
	with both NTSC and PAL (multi-system).	displayed.
	with both NTSC and PAL (multi-system).
	The output format will be in accordance with	{ 16:9 Wide Screen }
	the video signal of the disc.	{ 16:9 Wide Screen }
	the video signal of the disc.	Select this if you have a wide-
		Select this if you have a wide-
	5 Select a setting and press OK.	screen TV.
	5 Select a setting and press OK.
	➜ Follow the instructions shown on the	5 Select a setting and press OK.
	TV to confirm the selection (if any).	5 Select a setting and press OK.
	TV to confirm the selection (if any).
	➜ If a blank/distorted TV screen appears,
	wait for 15 seconds for the auto
	recovery.

TIPS: The underlined option is the factory default setting.

To return to the previous menu, press 1. To remove the menu, press SETUP.

001-045-hts3300-01-Eng3

12/9/05, 11:30 AM 3139 115 2xxx1

{ 4:3 Pan Scan }

{ NTSC }

{ 4:3 Letter Box }

{ Multi }

{ 16:9 Wide Screen }

wait for 15 seconds for the auto

recovery.